LaSalle Bristol RV Waste Valves - LSB86JR

Replace the waste valve on your RV's gray-water tank with this cable-actuated gate valve. 190" Cable lets you open or close it from hard-to-reach spots. Non-stick seals resist cracking. Fits 1-1/2" pipe.

Features:

• Waste valve assembly allows wastewater to travel from your tank when valve is open
• 60" Long cable allows valve to be placed in secure location or hard-to-reach spot
  • Easy-to-grip handle on end of cable mounts in a convenient location so you can open or close the valve without crawling under your RV
  • Cable is lubricated for smooth, effortless movement
• Lubricated valve seals resist leaking
  • Non-stick coating keeps sewage off of the seals
  • No drying or cracking like non-lubricated rubber seals
• Sturdy plastic valve body resists water damage
• Thick steel cable is durable and long-lasting
  • Protective coating limits corrosion
• Simple installation
  • Hub end fits over your sewer pipe
  • Spigot end slides into your sewer pipe
  • Secure valve to pipe with ABS solvent cement (3447530889 - sold separately)
• NSF approved
• Made in the USA

Specs:

• Application: 1-1/2" diameter gray-water sewer pipe
• Cable length: 190"
• 1-Year warranty

Pull Cable for Easy Dumping

This cable-actuated RV waste tank valve has a 190" long cable, allowing you to easily open and close the valve even when it is positioned in a hard-to-reach location. Simply install the valve between your RV's sewer pipes and mount the handle on the end of the cable in a convenient, easy-to-access place.

When you're ready to dump your gray-water tank, just pull the handle to open the valve. And when you're finished dumping, just push the handle back in to close the valve. No need to crawl under your RV to access the valve itself.

Replacing Your RV Waste Valve

Before getting started on the installation, you'll want to empty your gray-water tank, then flush out the sewer pipes. This will help to ensure that your working environment is as clean as possible.

This waste valve is designed to replace your existing valve, which should have a hub end and a spigot end. After removing the old valve and flanges, lightly coat the outside of the new valve's spigot and the inside of its hub with ABS solvent cement (sold separately). Do the same with the open ends of your RV's sewer pipe. Then, insert the smaller spigot end of the valve into your 1-1/2" pipe, and slide the larger hub end over the pipe on the opposite side.

66N11AB190GM La Salle Bristol Dump Valve for Camper or Motorhome Grey Water Holding Tank - Termination Valve - 1-1/2" Diameter - Hub to Spigot - 15' 10" Cable